Effect of V content on the microstructure and mechanical properties of HPT nanostructured CoCrFeMnNiVx high entropy alloys

Effect of V Content on the Microstructure and Mechanical Properties of High-Pressure Torsion Nanostructured CoCrFeMnNiVx High-Entropy Alloys

Authors: Tabachnikova, E.D., Smirnov, S.N., Shapovalov, Y.O., Kolodiy, I.V., Levenets, A.V., Tikhonovsky, M.A., Zehetbauer, M.J., Rentenberger, C., Schafler, E., Huang, Y., Langdon, T.G.

Journal: Advanced Engineering Materials

Publication Date: 01/10/2024

Volume: 26

Issue: 19

eISSN: 1527-2648

ISSN: 1438-1656

DOI: 10.1002/adem.202400692

Abstract:

The article presents investigations of microstructure and low-temperature mechanical properties of nanostructured alloys CoCrFeMnNiVx (x = 0.15–0.75), processed by high-pressure torsion (HPT) at temperatures of 300 and 77 K. While at x ≥ 0.5 the values of microhardness (Hv) and compression yield stress (σ0.2) in samples after HPT at 77 K are larger than those in samples after HPT at 300 K, for x ≤ 0.2 surprisingly the opposite effect is observed. As in case of the undeformed CoCrFeMnNiVx alloys, the behavior for vanadium concentrations x ≥ 0.5 can be related to the formation of tetragonal σ-phase in addition to face-centered cubic matrix, while the anomalous behavior for x ≤ 0.2 arises from the formation of HPT-induced hexagonal martensitic phase. In the low-temperature ranges, i.e., 20–300 K in case of HPT nanostructured CoCrFeMnNiV0.2, and 150–300 K in case of HPT nanostructured CoCrFeMnNiV0.5, dependences of σ0.2(T) show characteristics of thermally activated dislocation movement. For the first time in high-entropy alloys, anomalous dependences of σ0.2(T) at temperatures 4.2–20 K for CoCrFeMnNiV0.2, and at 80–150 K for CoCrFeMnNiV0.5 are found, which indicate at the occurrence of nonthermal inertial dislocation movement.

https://eprints.bournemouth.ac.uk/39894/

Source: Scopus

Effect of V Content on the Microstructure and Mechanical Properties of High-Pressure Torsion Nanostructured CoCrFeMnNiV<sub><i>x</i></sub> High-Entropy Alloys

Authors: Tabachnikova, E.D., Smirnov, S.N., Shapovalov, Y.O., Kolodiy, I.V., Levenets, A.V., Tikhonovsky, M.A., Zehetbauer, M.J., Rentenberger, C., Schafler, E., Huang, Y., Langdon, T.G.

Journal: ADVANCED ENGINEERING MATERIALS

Publication Date: 10/2024

Volume: 26

Issue: 19

eISSN: 1527-2648

ISSN: 1438-1656

DOI: 10.1002/adem.202400692

https://eprints.bournemouth.ac.uk/39894/

Source: Web of Science

Authors: Tabachnikova, E.D., Smirnov, S.N., Shapovalov, Y.O., Kolodiy, I.V., Levenets, A.V., Tikhonovsky, M.A., Zehetbauer, M.J., Rentenberger, C., Schafler, E., Huang, Y., Langdon, T.G.

Journal: Advanced Engineering Materials

Publication Date: 01/10/2024

Volume: 26

Issue: 19

Pages: 2400692(1)-2400692(12)

DOI: 10.1002/adem.202400692

https://eprints.bournemouth.ac.uk/39894/

Source: Manual

Preferred by: Yi Huang