Ruben Gonzalez Rodriguez

Ruben Gonzalez Rodriguez

  • gonzalezrruben at uniovi dot es
Back to top

Journal Articles

  • Sernaglia, M., Bartolomé, M., Viesca, J.L., González, R., Battez, A.H., 2025. Application of deep eutectic solvents in lubrication: A review. Journal of Molecular Liquids, 427.
  • Sanjurjo, C., Rodríguez, E., Bartolomé, M., González, R., Battez, A.H., 2024. Optimizing the Conversion of Bio-Oil from Haematococcus pluvialis to Fatty Acid Methyl Esters. Bioenergy Research, 17 (4).
  • Sernaglia, M., Rivera, N., Bartolomé, M., Fernández-González, A., González, R., Viesca, J.L., 2024. Tribological behavior of two novel choline acetate-based deep eutectic solvents. Journal of Molecular Liquids, 414.
  • García-Blanco, I., Bozeman, S.C., Tucker, J.D., González, R., Isgor, B., 2024. Corrosion Behavior of Cobalt–Chromium-Based Laser Claddings Reinforced with Boron Nitride, Graphene Oxide, and Graphite. Advanced Engineering Materials, 26 (20).
  • Díaz-Secades, L.A., González, R., Rivera, N., Quevedo, J.R., Montañés, E., 2024. Parametric study of organic Rankine working fluids via Bayesian optimization of a preference learning ranking for a waste heat recovery system applied to a case study marine engine. Ocean Engineering, 306.
  • Sanjurjo, C., Oulego, P., Bartolomé, M., Rodríguez, E., Gonzalez, R., Hernández Battez, A., 2024. Biodiesel production from the microalgae Nannochloropsis gaditana: Optimization of the transesterification reaction and physicochemical characterization. Biomass and Bioenergy, 185.
  • García-Blanco, I., García, T.E., Cabezas, J.G., González, R., Álvarez, G., Rodríguez, C., 2024. Use of the small punch test for mechanical characterization of co– based laser cladding joint. Engineering Failure Analysis, 159.
  • Díaz-Secades, L.A., González, R., Rivera, N., 2023. Waste heat recovery from marine engines and their limiting factors: Bibliometric analysis and further systematic review. Cleaner Energy Systems, 6.
  • Díaz-Secades, L.A., González, R., Rivera, N., Montañés, E., Quevedo, J.R., 2023. Waste heat recovery system for marine engines optimized through a preference learning rank function embedded into a Bayesian optimizer. Ocean Engineering, 281.
  • Bartolomé, M., Gonçalves, D., García Tuero, A., González, R., Hernández Battez, A., Seabra, J.H.O., 2023. Phosphonium-based ionic liquids as grease additives in rolling bearing tests. Journal of Molecular Liquids, 382.
  • Tuero, A.G., Sanjurjo, C., Rivera, N., Viesca, J.L., González, R., Battez, A.H., 2022. Electrical conductivity and tribological behavior of an automatic transmission fluid additised with a phosphonium-based ionic liquid. Journal of Molecular Liquids, 367.
  • Díaz-Secades, L.A., González, R., Rivera, N., 2022. Waste heat recovery from marine main medium speed engine block. Energy, exergy, economic and environmental (4E) assessment – Case study. Ocean Engineering, 264.
  • Rodríguez, E., Rivera, N., Fernández-González, A., Pérez, T., González, R., Battez, A.H., 2022. Electrical compatibility of transmission fluids in electric vehicles. Tribology International, 171.
  • Faes, J., González, R., Blanco, D., Fernández-González, A., Hernández-Battez, A., Iglesias, P., Viesca, J.L., 2022. Methyltrioctylammonium Octadecanoate as Lubricant Additive to Different Base Oils. Lubricants, 10 (6).
  • Ramajo, B., Blanco, D., Rivera, N., Viesca, J.L., González, R., Battez, A.H., 2021. Long-term thermal stability of fatty acid anion-based ionic liquids. Journal of Molecular Liquids, 328.
  • Bartolomé, M., Gonçalves, D., Tuero, A.G., González, R., Battez, A.H., Seabra, J.H.O., 2021. Greases additised with phosphonium-based ionic liquids - Part I: Rheology, lubricant film thickness and Stribeck curves. Tribology International, 156.
  • Viesca, J.L., González-Cachón, S., García, A., González, R., Bernardo-Sánchez, A., Hernández Battez, A., 2021. Influence of environmental conditions and oxidation on the coefficient of friction using microalloyed rail steels. Proceedings of the Institution of Mechanical Engineers Part F Journal of Rail and Rapid Transit, 235 (3), 353-360.
  • Bartolomé Sáez, M., Hernández Battez, A.E., Espina Casado, J., Viesca Rodríguez, J.L., Fernández-González, A., González Rodriguez, R., 2021. Tribological behavior of oils additised with a phosphonium-derived ionic liquid compared to a commercial oil. Industrial Lubrication and Tribology, 73 (1), 137-144.
  • Viesca, J.L., Faes, J., Rivera, N., Rodríguez, E., Cadenas, M., González, R., 2021. Thermal stability, traction and tribofilm formation of three fatty acid-derived ionic liquids. Tribology International, 154.
  • Viesca, J.L., Oulego, P., González, R., Guo, H., Battez, A.H., Iglesias, P., 2021. Miscibility, corrosion and environmental properties of six hexanoate- and sulfonate-based protic ionic liquids. Journal of Molecular Liquids, 322.
  • Faes, J., González, R., Battez, A.H., Blanco, D., Fernández-González, A., Viesca, J.L., 2021. Friction, wear and corrosion behavior of environmentally-friendly fatty acid ionic liquids. Coatings, 11 (1), 1-16.
  • Sernaglia, M., Blanco, D., Hernández Battez, A., González, R., Fernández-González, A., Bartolomé, M., 2020. Two fatty acid anion-based ionic liquids - part II: Effectiveness as an additive to a polyol ester. Journal of Molecular Liquids, 310.
  • Sernaglia, M., Blanco, D., Battez, A.H., Viesca, J.L., González, R., Bartolomé, M., 2020. Two fatty acid anion-based ionic liquids - part I: Physicochemical properties and tribological behavior as neat lubricants. Journal of Molecular Liquids, 305.
  • Rivera, N., Blanco, D., Viesca, J.L., Fernández-González, A., González, R., Battez, A.H., 2019. Tribological performance of three fatty acid anion-based ionic liquids (FAILs) used as lubricant additive. Journal of Molecular Liquids, 296.
  • Rivera, N., García, A., Fernández-González, A., Blanco, D., González, R., Battez, A.H., 2019. Tribological behavior of three fatty acid ionic liquids in the lubrication of different material pairs. Journal of Molecular Liquids, 296.
  • Rivera, N., García, A., González, R., Fernández-González, A., Hernández Battez, A., Cadenas, M., 2019. Ionic-liquid lubrication of a nickel-based coating reinforced with tungsten carbide particles. Journal of Molecular Liquids, 293.
  • González, R., Viesca, J.L., Battez, A.H., Hadfield, M., Fernández-González, A., Bartolomé, M., 2019. Two phosphonium cation-based ionic liquids as lubricant additive to a polyalphaolefin base oil. Journal of Molecular Liquids, 293.
  • Oulego, P., Faes, J., González, R., Viesca, J.L., Blanco, D., Battez, A.H., 2019. Relationships between the physical properties and biodegradability and bacteria toxicity of fatty acid-based ionic liquids. Journal of Molecular Liquids, 292.
  • Blanco, D., Rivera, N., Oulego, P., Díaz, M., González, R., Battez, A.H., 2019. Novel fatty acid anion-based ionic liquids: Contact angle, surface tension, polarity fraction and spreading parameter. Journal of Molecular Liquids, 288.
  • Battez, A.H., Rivera, N., Blanco, D., Oulego, P., Viesca, J.L., González, R., 2019. Physicochemical, traction and tribofilm formation properties of three octanoate-, laurate- and palmitate-anion based ionic liquids. Journal of Molecular Liquids, 284, 639-646.
  • González, R., Ramos, D., Blanco, D., Fernández-González, A., Viesca, J.L., Hadfield, M., Hernández Battez, A., 2019. Tribological performance of tributylmethylammonium bis(trifluoromethylsulfonyl)amide as neat lubricant and as an additive in a polar oil. Friction, 7 (3), 282-288.
  • Viesca, J.L., González-Cachón, S., García, A., González, R., Hernández Battez, A., 2018. Tribological behaviour of microalloyed and conventional C–Mn rail steels in a pure sliding condition. Proceedings of the Institution of Mechanical Engineers Part F Journal of Rail and Rapid Transit, 232 (9), 2201-2214.
  • Battez, A.H., Ramos, D., Blanco, D., González, R., Fernández-González, A., Viesca, J.L., 2018. Lubrication Properties of the Ionic Liquid Dodecyl-3 Methylimidazolium bis(trifluoromethylsulfonyl)imide. Tribology Letters, 66 (1).
  • Fernández-González, A., Mallada, M.T., Viesca, J.L., González, R., Badía, R., Hernández-Battez, A., 2017. Corrosion activity and solubility in polar oils of three bis(trifluoromethylsulfonyl) imide/bis(trifluoromethylsulfonyl) amide ([NTF2]) anion-based ionic liquids. Journal of Industrial and Engineering Chemistry, 56, 292-298.
  • Blanco, D., González, R., Viesca, J.L., Fernández-González, A., Bartolomé, M., Hernández Battez, A., 2017. Antifriction and Antiwear Properties of an Ionic Liquid with Fluorine-Containing Anion Used as Lubricant Additive. Tribology Letters, 65 (2).
  • Hernández Battez, A., Fernandes, C.M.C.G., Martins, R.C., Bartolomé, M., González, R., Seabra, J.H.O., 2017. Two phosphonium cation-based ionic liquids used as lubricant additive: Part I: Film thickness and friction characteristics. Tribology International, 107, 233-239.
  • Blanco, D., Bartolomé, M., Ramajo, B., Viesca, J.L., González, R., Hernández Battez, A., 2017. Isoconversional kinetic analysis applied to five phosphonium cation-based ionic liquids. Thermochimica Acta, 648, 62-74.
  • Viesca, J.L., Mallada, M.T., Blanco, D., Fernández-González, A., Espina-Casado, J., González, R., Hernández Battez, A., 2017. Lubrication performance of an ammonium cation-based ionic liquid used as an additive in a polar oil. Tribology International, 116, 422-430.
  • Hernández Battez, A., Blanco, D., Fernández-González, A., Mallada, M.T., González, R., Viesca, J.L., 2016. Friction, wear and tribofilm formation with a [NTf2] anion-based ionic liquid as neat lubricant. Tribology International, 103, 73-86.
  • Blanco, D., Viesca, J.L., Mallada, M.T., Ramajo, B., González, R., Battez, A.H., 2016. Wettability and corrosion of [NTf2] anion-based ionic liquids on steel and PVD (TiN, CrN, ZrN) coatings. Surface and Coatings Technology, 302, 13-21.
  • Blanco, D., Bartolomé, M., Ramajo, B., Viesca, J.L., González, R., Hernández Battez, A., 2016. Wetting Properties of Seven Phosphonium Cation-Based Ionic Liquids. Industrial and Engineering Chemistry Research, 55 (36), 9594-9602.
  • García, A., Fernández, M.R., Cuetos, J.M., González, R., Ortiz, A., Cadenas, M., 2016. Study of the Sliding Wear and Friction Behavior of WC + NiCrBSi Laser Cladding Coatings as a Function of Actual Concentration of WC Reinforcement Particles in Ball-on-Disk Test. Tribology Letters, 63 (3).
  • González, R., Bartolomé, M., Blanco, D., Viesca, J.L., Fernández-González, A., Battez, A.H., 2016. Effectiveness of phosphonium cation-based ionic liquids as lubricant additive. Tribology International, 98, 82-93.
  • Anand, M., Hadfield, M., Viesca, J.L., Thomas, B., González, R., Cantrill, R., Battez, A.H., 2016. Assessing boundary film forming behavior of phosphonium ionic liquids as engine lubricant additives. Lubricants, 4 (2).
  • Hernández Battez, A., Bartolomé, M., Blanco, D., Viesca, J.L., Fernández-González, A., González, R., 2016. Phosphonium cation-based ionic liquids as neat lubricants: Physicochemical and tribological performance. Tribology International, 95, 118-131.
  • Fernandes, C.M.C.G., Battez, A.H., González, R., Monge, R., Viesca, J.L., García, A., Martins, R.C., Seabra, J.H.O., 2015. Torque loss and wear of FZG gears lubricated with wind turbine gear oils using an ionic liquid as additive. Tribology International, 90, 306-314.
  • Monge, R., González, R., Hernández Battez, A., Fernández-González, A., Viesca, J.L., García, A., Hadfield, M., 2015. Ionic liquids as an additive in fully formulated wind turbine gearbox oils. Wear, 328-329, 50-63.
  • Fernández, M.R., García, A., Cuetos, J.M., González, R., Noriega, A., Cadenas, M., 2015. Effect of actual WC content on the reciprocating wear of a laser cladding NiCrBSi alloy reinforced with WC. Wear, 324-325, 80-89.
  • García, A., González, R., Hernández Battez, A., Viesca, J.L., Monge, R., Fernández-González, A., Hadfield, M., 2014. Ionic liquids as a neat lubricant applied to steel-steel contacts. Tribology International, 72, 42-50.
  • Hernández Battez, A., Viesca, J.L., González, R., García, A., Reddyhoff, T., Higuera-Garrido, A., 2014. Effect of Shear Rate, Temperature, and Particle Concentration on the Rheological Properties of ZnO and ZrO2 Nanofluids. Tribology Transactions, 57 (3), 489-495.
  • Viesca, J.L., Garcia, A., Hernandez Battez, A., Gonzalez, R., Monge, R., Fernandez-Gonzalez, A., Hadfield, M., 2013. FAP- Anion Ionic Liquids Used in the Lubrication of a Steel-Steel Contact. TRIBOLOGY LETTERS, 52 (3), 431-437.
  • González, R., Battez, A.H., Viesca, J.L., Higuera-Garrido, A., Fernández-González, A., 2013. Lubrication of DLC Coatings with Two Tris(pentafluoroethyl)trifluorophosphate Anion-Based Ionic Liquids. Tribology Transactions, 56 (5), 887-895.
  • Hernández Battez, A., González, R., Viesca, J.L., Fernández-González, A., Hadfield, M., 2013. Lubrication of PVD coatings with ethyl-dimethyl-2-methoxyethylammonium tris(pentafluoroethyl)trifluorophosphate. Tribology International, 58, 71-78.
  • Higuera-Garrido, A., Wang, C., Gonzalez, R., Hernandez Battez, A., Sadeghi, F., 2012. Non-uniform behavior of lubricant flow according to surface texturing distribution. American Society of Mechanical Engineers, Tribology Division, TRIB.
  • Higuera-Garrido, A., González, R., Cadenas, M., Viesca, J.L., Hernández-Battez, A., 2011. Microstructure of NiCrBSi laser cladding coatings textured by ND-YAG laser. American Society of Mechanical Engineers Tribology Division TRIB, 55-57.
  • Battez, A.H., Alonso, D.B., Rodriguez, R.G., Rodriguez, J.L.V., Fernandez-Gonzalez, A., Garrido, A.H., 2011. Lubrication of DLC and TiN coatings with two ionic liquids used as neat lubricant and oil additive. American Society of Mechanical Engineers Tribology Division TRIB, 95-97.
  • Rodriguez, R.G., Rodriguez, J.L.V., Battez, A.H., Asedegbega, E., Garrido, A.H., Perez, A.T., 2011. 1-hexyl-3-methylimidazolium hexafluorophosphate as oil additive for the lubrication of steel-steel contacts and its influence on the running-in and wear-in periods. American Society of Mechanical Engineers Tribology Division TRIB, 87-89.
  • Pérez, A.T., Battez, A.H., García-Atance, G., Viesca, J.L., González, R., Hadfield, M., 2011. Use of optical profilometry in the ASTM D4172 standard. Wear, 271 (11-12), 2963-2967.
  • Viesca, J.L., Hernández Battez, A., González, R., Chou, R., Cabello, J.J., 2011. Antiwear properties of carbon-coated copper nanoparticles used as an additive to a polyalphaolefin. Tribology International, 44 (7-8), 829-833.
  • Higuera, A., Gonzalez, R., Cadenas, M., Hernandez Battez, A., 2011. Tribological behavior of laser-textured NiCrBSi coatings. Wear, 271, 925-933.
  • Blanco, D., González, R., Hernández Battez, A., Viesca, J.L., Fernández-Gonzlez, A., 2011. Use of ethyl-dimethyl-2-methoxyethylammonium tris(pentafluoroethyl) trifluorophosphate as base oil additive in the lubrication of TiN PVD coating. Tribology International, 44 (5), 645-650.
  • Garrido, A.H., González, R., Cadenas, M., Viesca, J.L., 2011. NiCrBSi coatings textured by Nd-YAG laser. International Journal of Surface Science and Engineering, 5 (2-3), 75-97.
  • Blanco, D., Battez, A.H., Viesca, J.L., González, R., Fernández-González, A., 2011. Lubrication of CrN coating with ethyl-dimethyl-2-methoxyethylammonium tris(pentafluoroethyl)trifluorophosphate ionic liquid as additive to PAO 6. Tribology Letters, 41 (1), 295-302.
  • Hernández Battez, A., Torres Pérez, A., García-Atanje, G., Viesca, J.L., González, R., Hadfield, M., 2010. Advantages of using optical profilometry in the ASTM D4172 standard. Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2010.
  • González, R., Viesca, J.L., Hernández Battez, A., Torres Pérez, A., García-Atanje, G., 2010. Tribological improvement of using ionic liquids and nanoparticles as oil additives. Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2010.
  • González, R., Hernández Battez, A., Blanco, D., Viesca, J.L., Fernández-González, A., 2010. Lubrication of TiN, CrN and DLC PVD coatings with 1-butyl-1- methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate. Tribology Letters, 40 (2), 269-277.
  • Viesca, J.L., Hernandez Battez, A., Gonzalez, R., Reddyhoff, T., Perez, A.T., Spikes, H.A., 2010. Assessing boundary film formation of lubricant additivised with 1-hexyl-3-methylimidazolium tetrafluoroborate using ECR as qualitative indicator. WEAR, 269 (1-2), 112-117.
  • Hernández Battez, A., Viesca, J.L., González, R., Blanco, D., Asedegbega, E., Osorio, A., 2010. Friction reduction properties of a CuO nanolubricant used as lubricant for a NiCrBSi coating. Wear, 268 (1), 325-328.
  • Battez, A.H., González, R., Viesca, J.L., Blanco, D., Asedegbega, E., Osorio, A., 2009. Tribological behaviour of two imidazolium ionic liquids as lubricant additives for steel/steel contacts. Wear, 266 (11-12), 1224-1228.
  • Hernández Battez, A., González, R., Viesca, J.L., Fernández, J.E., Díaz Fernández, J.M., Machado, A., Chou, R., Riba, J., 2008. CuO, ZrO2 and ZnO nanoparticles as antiwear additive in oil lubricants. Wear, 265 (3-4), 422-428.
  • Hernández Battez, A., González, R., Felgueroso, D., Fernández, J.E., del Rocío Fernández, M., García, M.A., Peñuelas, I., 2007. Wear prevention behaviour of nanoparticle suspension under extreme pressure conditions. Wear, 263 (7-12 SPEC. ISS.), 1568-1574.
  • González, R., García, M.A., Peñuelas, I., Cadenas, M., Fernández, M.D.R., Battez, A.H., Felgueroso, D.. Microstructural study of NiCrBSi coatings obtained by different processes. Wear, 263 (1-6 SPEC. ISS.).
  • González, R., Cadenas, M., Fernández, R., Cortizo, J.L., Rodríguez, E.. Wear behaviour of flame sprayed NiCrBSi coating remelted by flame or by laser. Wear, 262 (3-4).
  • Fernández, E., Cadenas, M., González, R., Navas, C., Fernández, R., Damborenea, J.D.. Wear behaviour of laser clad NiCrBSi coating. Wear, 259 (7-12).

Chapters

Conferences

  • Blanco, D., González, R., Viesca, J.L., Fernández-González, A., Oulego, P., Hernández Battez, A., 2018. Ammonium vs. phosphonium cation-based ionic liquids as neat lubricants: Physicochemical, environmental and tribological behavior. 73rd Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2018, 302-304.
  • Higuera-Garrido, A., Wang, C., González, R., Báttez, A.H., Sadeghi, F.. Non-uniform behavior of lubricant flow according to surface texturing distribution. American Society of Mechanical Engineers, Tribology Division, TRIB.
  • Higuera-Garrido, A., González, R., Cadenas, M., Viesca, J.L., Hernández-Battez, A.. Microstructure of NiCrBSi laser cladding coatings textured by ND-YAG laser. American Society of Mechanical Engineers, Tribology Division, TRIB.
  • Battez, A.H., Alonso, D.B., Rodriguez, R.G., Rodriguez, J.L.V., Fernandez-Gonzalez, A., Garrido, A.H.. Lubrication of DLC and TiN coatings with two ionic liquids used as neat lubricant and oil additive. American Society of Mechanical Engineers, Tribology Division, TRIB.
  • Rodriguez, R.G., Rodriguez, J.L.V., Battez, A.H., Asedegbega, E., Garrido, A.H., Perez, A.T.. 1-hexyl-3-methylimidazolium hexafluorophosphate as oil additive for the lubrication of steel-steel contacts and its influence on the running-in and wear-in periods. American Society of Mechanical Engineers, Tribology Division, TRIB.
  • Hernández Battez, A., Torres Pérez, A., García-Atanje, G., Viesca, J.L., González, R., Hadfield, M.. Advantages of using optical profilometry in the ASTM D4172 standard. Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2010.
  • González, R., Viesca, J.L., Hernández Battez, A., Torres Pérez, A., García-Atanje, G.. Tribological improvement of using ionic liquids and nanoparticles as oil additives. Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2010.
  • Battez, A.H., Rodriguez, R.G., Rodriguez, J.L.V., Rico, J.E.F., 2009. Viscosity and tribology of copper oxide nanofluids. 2008 Proceedings of the STLE ASME International Joint Tribology Conference Ijtc 2008, 205-207.
  • Battez, A.H., Rodriguez, R.G., Rodriguez, J.L.V., Rico, J.E.F.. Viscosity and tribology of copper oxide nanofluids. 2008 Proceedings of the STLE/ASME International Joint Tribology Conference, IJTC 2008.
  • Gonzalez, R., Garcia, M.A., Peñuelas, I., Cadenas, M., Fernandez, M.R., Hernandez Battez, A., Felgueroso, D., 2007. Microstructural study of NiCrBSi coatings obtained by different processes. In: 16th International Conference on Wear of Materials 16/04/2007 Montreal, Canada.

PhD Students

  • Ángel del Reguero Huerta. Tribological behavior of functionalized nanoparticles as additives in industrial lubricants
  • Raquel Monge García. Tribological improvenent of the wind turbine gearboxes by mechanical design optimization, ussiing of coatings and lubrication with ionic liquids

Profile of Teaching UG

  • Marine Engines
  • Maintenance

Grants

  • Formulation of "Fuel Economy" oils using ionic liquids as additive (Ministry of Economy and Competitiveness, 01 Jan 2014). In Progress
  • Confocal and Interferometer Leica DCM 3D Microscope (Principality of Asturias (Spain), 13 Oct 2011). Awarded
  • Improvement of efficiency and durability of wind turbine gearboxes by using of coatings, lubrication with ionic liquids and laser texturing (Ministry of Science and Innovation (Spain), 01 Jan 2011). Awarded
  • Design and manufacturing of laser cladding functionally graded coatings with predefined tribological behaviours (Ministry of Science and Innovation (Spain), 01 Jan 2011). Awarded
  • Energy savings through the combined use of coatings and ionic liquids (Principality of Asturias (Spain), 01 Nov 2009). Awarded
  • Laser meshing of plasma sprayed coatings and texturing of laser cladding coatings: effects on the lubricated wear (Ministry of Science and Education (Spain), 01 Mar 2007). Awarded
  • Lubricated wear behavior of plasma sprayed ceramic (base Cr2O3) and nickel base alloys coatings, with and without post-laser treatment, faced with elastomers (Ministry of Science and Education (Spain), 01 Nov 2002). Awarded
  • Optimisation of NiCrBSi coatings deposited by flame-spray and by laser cladding techniques to improve the wear and the corrosion (Ministry of Science and Technology (Spain), 01 Jan 2002). Awarded

Qualifications

  • PhD in Mechanical Engineering - Tribology (2007)
  • BEng (Hons) in Marine Engineering (2000)

Honours

  • Award for the Best Academic Record in the Higher Nautical School of University of Oviedo.
  • Excellence award for the best Ph.D. Thesis in the Department of Mechanical and Civil Engineering of Oviedo University.
The data on this page was last updated at 05:00 on February 17, 2026.